Used wire nail making machine
Comparing the used wire nail making machine, the new common wire nails making machine is much higher. So if you prefer the cheaper price for a nails machine, why not consider whether can accept a used machine for nail making?
USED WIRE NAIL MAKING MACHINE FOR AFRICA
In fact, the used machine quality is not much different with a new one, all are in good condition. Before we sell, we replaced all the quick-ware parts, like the punch pin, gears, Copper tile, screws and nuts, oil system, all the spare parts. And after renew, we will adjust and test times. So we can ensure the nails making machine is in good condition.
SPECIFICATION FOR USED COMMON NAILS MAKING MACHINE
Model | diameter of nails | length of nails | Designed speed | Motor | Dimension | Weight |
Z94-1C | 0.9-1.6mm | 9-25mm | 450pcs/min | 1.5kw | 1.5*1.3*1.1m | 1.2tons |
Z94-2C | 1.2-2.8mm | 16-50mm | 380pcs/min | 2.2kw | 1.7*1.3*1.4m | 1.45tons |
Z94-3C | 1.8-3.5mm | 30-75mm | 320pcs/min | 3kw | 2.0*1.4*1.4m | 1.8tons |
Z94-4C | 2.8-4.5mm | 50-100mm | 260pcs/min | 4kw | 2.2*1.6*1.6m | 2Tons |
Z94-4C (2) | 2.8-5mm | 50-120mm | 260pcs/min | 4KW | 2.3*1.6*1.3m | 2.1Tons |
Z94-5.5C | 3.8-5.5mm | 75-150mm | 220pcs/min | 5.5kw | 2.5*1.8*1.5m | 2.3tons |
Z94-6C | 4-8mm | 100-200mm | 180pcs/min | 11KW | 3.4*1.9*1.5m | 5tons |
Z94-6A(2) | 3-6.5mm | 175-400mm | 80pcs/min | 15kw | 3.5*1.9*1.8m | 8tons |
Z94-8A | 5-10mm | 180-320mm | 120pcs/min | 22kw | 6*2.1*1.9m | 10tons |
ADVANTAGE OF NAILS MAKING MACHINE
- High capacity and production process automation
- Low noise
- Automatic lubricator
- High dimensional accuracy of produced nails
- Automatic wire feeding system
- Alarm system and automatic shutdown system in case of failures of wire feeding system, equipment overload, low lubrication, and any defects
- Closed construction frame for used wire nail making machine
- Very High level of occupational safety for nails making automaticly.
- Unique patent, two-time heading, double-dies and double-punches structure
- Bigger nail heads can be easily gotten
- Nail heads are always very round and in the center.
- Nail head without knock marks, consistent and good looking
- Uniform thickness of the nail cap diameter.
- Hollow design nail clamping dies, no small head, no ash blocking, no clip crumbs, no cracking, no frequent dies demolition.
- Shorter stroke, lower mechanical wear
- High precision, nail cutters work without touch, low tool wear.
- One set of cutters’ cutting times up to 10 million times
- Feeding and rewinding structure for HIGH SPEED AUTOMATIC NAIL MAKING MACHINES
- High -precision feeding device. The error of each nail length is controlled within 0.3mm
- Unique wire feeding and retreating combination, each nail through the wire feeding, cutting, wire retreating, three mechanical action, the nail will be completely separated from the nail shank to ensure quality.
- For the machine with cover, we adopt good sound insulation material, which can effectively reduce the noise.
- Nail cutter holder adopts pendulum structure