high speed wire nail making machine

We are the leading manufacturer and exporter of Nail Making Machine and HIGH SPEED WIRE NAIL MAKING MACHINE.

High-speed Automatic Nail Making Machines are designed for large-scale various sizes of wire nail production. Nail Making Machines have the following characteristics:

HIGH SPEED WIRE NAIL MAKING MACHINE DETAILS

  • High capacity and production process automation
  • Low noise
  • Automatic lubricator
  • High dimensional accuracy of produced nails
  • Automatic wire feeding system
  • Alarm system and automatic shutdown system in case of failures of wire feeding system, equipment overload, low lubrication, and any defects
  • Closed construction frame
  • Very High level of occupational safety

Z94 6C NAIL MAKING MACHINE

What is the Z94 6c nail making machine? Z94 is a series of 1C 2C 3C 4C 5C, 5.5C, 6C for nail making machine. Our Z94-C nail making machine adopts a piston structure to ensure the high working speed, low noise, and less chance of impact characteristics especially can make excellent quality round head common nail and another special-shaped nail which is suitable for high-speed studs for welding machine and a nail gun.

Our nail making machine adopts a hinged plunger structure. Three drive shafts use rolling bearing support, and the cam arc structure is improved. The Z94 nail making machine has many good characteristics. Such as high speedlow noiseless impact, and high accuracy. In particular, it can manufacture common iron wire nails, roofing nails, concrete nails. Also screw coil nails, floor nails, and other special-shaped nails. All is good quality and suitable for high-speed nailing machines and nail guns. The whole Z94 6C nail producing machine has a beautiful appearance, easy to use, and safe operation. Also advanced design, compact structure.

VIDEO OF OPERATING Z94 6C NAIL MAKING MACHINE

Our Z94 nail making machine is strengthened type. The frame is heavier to ensure the fixedness after tension. we paid more attention to the details of every small part, all these small details ensure the best quality of the nail producing machines. So it can run for many years without any problems.

LIST OF HIGH SPEED WIRE NAIL MAKING MACHINE

Modeldiameter of nailslength of nailsDesigned speedMotorDimensionWeight
Z94-1C0.9-1.6mm9-25mm450pcs/min1.5kw1.5*1.3*1.1m1.2tons
Z94-2C1.2-2.8mm16-50mm380pcs/min2.2kw1.7*1.3*1.4m1.45tons
Z94-3C1.8-3.5mm30-75mm320pcs/min3kw2.0*1.4*1.4m1.8tons
Z94-4C2.8-4.5mm50-100mm260pcs/min4kw2.2*1.6*1.6m2Tons
Z94-4C (2)2.8-5mm50-120mm260pcs/min4KW2.3*1.6*1.3m2.1Tons
Z94-5.5C3.8-5.5mm75-150mm220pcs/min5.5kw2.5*1.8*1.5m2.3tons
Z94-6C4-8mm100-200mm180pcs/min11KW3.4*1.9*1.5m5tons
Z94-6A(2)3-6.5mm175-400mm80pcs/min15kw3.5*1.9*1.8m8tons
Z94-8A5-10mm180-320mm120pcs/min22kw6*2.1*1.9m10tons

AUTOMATIC NAILS MAKING MACHINE

HIGH SPEED WIRE NAIL MAKING MACHINE AM-2 – high productivity and low noise.

Automatic wire feeding system is equipped with a frequency converter. That allows the user to adjust the feed speed depending on the diameter and type of wire.

The common nail making machine has a malfunction alarm. And it can automatically stop in case of emergencies. Such as faults with the supply of raw materials, wire rod jamming, overload, lubricating oil shortage and others.

The Automatic nails making machine has flexible settings for automatic wire feeding system.

The high speed nails making machine frame is fully covered with painting. The Frame can ensure the high performance, low noise and dust levels. ALso can keep high operational safety. This kind of high Speed Nail Making Machine is very economical. One operator can run three AM-2 wire nail Machines.

AM-3 is a high-speed silent automatic Common iron wire Nail making Machine.

This automatic nails making equipment is used for manufacturing large size of common nails. It’s characterized by high accuracy and high performance. Also with outstanding safety performance, stable products quality and high reliability. The convenience of use and maintenance.

The Wire nails making machine has a malfunction alarm. It can utomatic shutdown in case of emergencies. Such as faults with the supply of raw materials, wire rod jamming, overload and lubricating oil shortage or others.

The nailing machine has an automatic lubricant feeding system and flexible settings program. The high speed wire nail machine frame is fully covered. Which ensures its high performance, low noise and dust levels. The important is operational safety.

The Am-3 nails making machine is also versatile. Not only can produce ordinary wire nails, but also can make other types of nails as well as blind rivets. One operator can manage two AM-3 nails making Machines.

HOW CAN GET Z94 NAIL MAKING MACHINE IN AFRICA?

The function of the Z94 6c Nail making machine is to make the nails into different sizes by adjusting the machine. It needs to put the suitable wire diameter into the entrance of the nail making machine. Then start the nail making machine, the machine will produce wood nails automatically. China’s price is not higher than the India machine. We really hope, clients can visit us if come to Hebei Province. Then we can show you what is the quality of Made in China.

You can import from Amigo Machine, which is the top 3 brands in China. Also, you can buy from your local market who selling machinery with a commission. Why do we need to know the Z94 6c nail making machine price? Z94 type nails producing machines have different size, some can make big nails, some can make small nails. The performance of Automatic Z94 Type C New Generation Nail Making Machine is High-Speed and low Noise. Do you know how to operate an automatic Z94-C type nail making machine and the machine price & worker salary? (nail machinenail making machineChina nail making machine price).

TESTING OF Z94 NAIL MAKING MACHINE BEFORE DELIVERY

WIRE DRAWING MACHINE FOR Z94 NAIL MACHINE

WIRE POINTING MACHINE OPERATING VEDEO

BUTT WELDING MACHINE FOR WIRE DRAWING

GRINDERING MACHINE FOR NAIL CUTTER

Above is the related video of NAIL MAKING MACHINE PRICE IN CHINA. Now hope you already know how to operate these nail making machine and AUXILIARY EQUIPMENT. Following, we introduce some spare parts of nail making machine.

SAPREPARTS FOR Z94 6C WIRE NAIL MAKING MACHINE

  • Sharpening dies: this machine is to sharpen the head of steel wire before it is feed into the wire drawing machine, the principle of the drawing machine is that using different size of drawing dies, for example, to draw steel wire of 6.5 mm to 3.8 mm, we can use a drawing die of 3.8mm, sharpen the head of 6.5mm steel wire less than 3.8 mm first, then put the head into the die, then fix the head of the wire to the wire drawing machine, then start pulling. After the wire comes through the die, all the wire becomes the diameter of 3.8mm.
  • Nail knife grinder: because after 1-2 days cutting, the nail knife installed on the wire nail making machines will become blunt, then you can use the nail knife grinder to grind the nail knife to make it sharp again.
  • Gripping Dies: Machines are provided with round dies having 8 or 10 nail holding grooves
  • Cutting Die: For cutting nails and making point after the head & shank are formed Diamond, Chisel, Round, Long or Blunt shaped Points can be made by grinding the tools appropriately 
  • Header Dies: Used for forming a nailhead Chequered or Plain Heads can be formed with these dies
  • Nail Cutter and Die Grinder (supplied with a motor, Emery wheels and Pedestal Stand)
  • Optional Accessories: Additional sets of Tooling (Set of Gripping Dies, Cutting Tools, and Header Dies)
  • Standard Accessories: Electric Motor, Starter, Belts, One set of Tooling, Wire Stand and Hand Operated Lubricating Pump
  • Further DETAILS OF Z94 6C NAIL MAKING MACHINE

AUXILIARY EQUIPMENT FOR Z94 CHINA NAIL MAKING MACHINE

  • Punch pin and nail Moulds.
  • Connecting welding machine: in case the wire breaks during drawing, you can use the butt welding machine to weld the broken wire together, then continue the drawing. without this machine, if the wire breaks, you need to sharpen the wire head again and do all things from the start.
  • Nail Polishing Drums (with a motor, starter, and belts)
  • Wire Drawing Machine (WE OFFER A COMPLETE WIRE DRAWING LINE TO DRAW NAIL WIRE IN VARIOUS DIAMETERS FROM 6 mm or 5.5 mm WIRE RODS)

HOW TO GET RAW MATERIALS?

  • Normally, you can buy from the local market or steel company.
  • If they can sell low carbon iron wire rod Q195,6.5mm/5.5mm. You can buy and use a wire drawing machine to draw to the thickness you need.
  • If better, you can get the thickness nails making wire you need.
  • And if local no wire rod and nails making wire, better import from China for any type of them.
  • What should import, depend on how is the quantity you want to produce daily output.
  • If quantity not much, you can just import nails making wire.
  • But if your quantity huge, better buy a wire drawing machine to draw for yourself using.
  • Then you can start a Fully automatic nail making machine imported from China to make nails.

What is the profit in wire nail making process?

Nail making business is profitable in Africa and Mid East, South Asia. The cost of wire nail making machines is not higher much. there are 8 types, different type can produce different sizes of nails. from 3/4inch, 1inch, 2inch, 2.5inch to 10 inch.

  • 1 inch machine is cheaper, About USD2000–2500/Set,
  • 2.5inch and 3 inch is middle, About USD5000–6000USD,
  • 4–10inch nail making machine is much expensive, about usd7000–9000/Set, but very less clients need it.

If you buy raw materials, the import duty is different from finished products. Some West Africa countries raised the tax to support the local company to set up nails making factory. so this is a good project to catch the developing speed.

  • As for the profit, I think at least USD50/T for the importers,
  • And they sell to distributors, who need profit also, right?
  • so the reasonable profit is not less USD70/Ton for nails making factory.
  • If you catch the right time with lower materials, profit not less than USD100–150/Ton.

If you have more machines, then daily output is not only 1 ton right? so the profit you can imagine now. We are in China, have a branch in Africaoffer train and install service after the sale. If you want to know more about how to earn profit in setting a nail making factory, catch us to further talk. Above are some of the “Questions about Chinese Nail making machine at Quora”

How much are barbed wire machine and China nail making machine? How long does it take for the investment to break even?

Barbed wire making machine cost abut USD3100/Set. The price of high-speed wire nail making machine in China is not higher. There are 8 types, a different type can produce different sizes of nails. from 3/4inch, 1inch, 2inch, 2.5inch to 10 inches.

  • 1 inch machine is cheaper, About USD2000–2500/Set,
  • 2.5inch and 3 inch is middle, About USD5000–6000USD,
  • 4–10inch nail making machine is much expensive, about usd7000–9000/Set, but very less clients need it.

Daily output steady, workers working well. 1 year is enough to get some profit also. We are in China, have a branch in Africa, offer train and install service after the sale. If you want to know more about the Z94-C type nail making machine, catch us to further talk.

Where can I find a wire nail making machine? How much does it approximately cost?

  1. you can buy from the local market, or by the second-hand high speed wire nail making machine from China.
  2. import from China, if your company can import, or you can get help for your forwarder agent.
  3. and you can contact us for further inquiry, we have a branch in Africa for nails making business, we can offer you whole unit nails making equipment, such as China nails making machine, wire drawing machine, polishing machine, etc.
  4. meanwhile, we can supply you raw materials, Q195 low carbon wire rod, or nails making wire with the different thickness you need.
  5. Meanwhile, we also can send our Chinese master to train your team and install your nail making plant. With us, your nail making business will succeed in a short time.
  6. The price of wire nail making machine is not higher much. there are 8 types, the different type can produce different sizes of nails. from 3/4inch, 1inch, 2inch, 2.5inch to 10 inches.

QUOTATION OF C TYPE NAIL MACHINE IN CHINA

  • The 1-inch machine is cheaper, About USD2000–2500/Set,
  • 2.5inch and 3 inch is middle, About USD5000–6000USD,
  • 4–10inch nail making machine is much expensive, about usd7000–9000/Set, but very less clients need it.

If you want to know more about the price of wire nail making machine, catch us to further talk. We are in China, have a branch in Africa, offer train and install service after the sale.

How do I find a quality Chinese nail supplier?

Which kind of nail making machine supplier are you looking for? You can search by google website, also use google image to checking. and some B2B websites, like Indiamart, TradeIndia, etc, google is more famous. In Guangzhou, there is a fair named “CANTON FAIR”, twice a year, in April and Oct, each time has three phases, different industries. Hardware, building material, handtool, Lighting, machinery, chemical, etc. we are in Common nails, concrete nails, roofing nails, and related nails making machines, etc. Any further questions, contact us freely. We can offer you Nail making machine price in china.

How much I can earn from setup of one nail making machine?

Nail making business is profitable in Africa and Mid East, South Asia. The cost of High-speed wire nail making machines is not higher much. there are 8 types, a different type can produce different sizes of nails. from 3/4inch, 1inch, 2inch, 2.5inch to 10 inches. We can offer you Nail making machine price in china.

  • 1 inch machine is cheaper, About USD2000–2500/Set,
  • 2.5inch and 3 inch is middle, About USD5000–6000USD,
  • 4–10inch nail making machine is much expensive, about usd7000–9000/Set, but very less clients need it.

If you buy raw materials, the import duty is different with finished products. Some West Africa countries rised the tax to support the local company to set up nails making factory. so this is the good project to catch the developing speed.

  • As for the profit, I think at least USD50/T for the importers,
  • And they sell to distributors, who need profit also, right?
  • so the reasonable profit is not less USD70/Ton for nails making factory.
  • If you catch the right time with lower materials, profit not less than USD100–150/Ton.

If you have more machines, then daily output is not only 1 ton right? so the profit you can imagine now. We are in China, have a branch in Africaoffer train and install service after the sale. If you want to know more about how to earn profit in setting nail making factory. catch us to further talk.

What is Nail making machine price in china?

The cost of wire nail making machines is not higher much. there are 8 types, the different type can produce different sizes of nails. from 3/4inch, 1inch, 2inch, 2.5inch to 10 inches. The 1-inch machine is cheaper, About USD2000–2500/Set, 2.5inch and 3 inch is middle, About USD5000–6000USD, 4–10inch nail making machine is much expensive, about usd7000–9000/Set, but very fewer clients need it. If you want to know more about the cost of wire nail making machine, catch us to further talk. We are in China, have a branch in Africa, offer train and install service after the sale.

What is the price of the wire nail machine?

The price of China wire nail making machines is not higher much. there are 8 types, the different type can produce different sizes of nails. from 3/4inch, 1inch, 2inch, 2.5inch to 10 inches. The 1-inch machine is cheaper, About USD2000–2500/Set, 2.5inch and 3 inch is middle, About USD5000–6000USD, 4–10inch nail making machine is much expensive, about usd7000–9000/Set, but very fewer clients need it. If you want to know more about the price of China wire nail making machine, catch us to further talk. We are in China, have a branch in Africa, offer train and install service after the sale.

Do you know how to set up a nail making factory in Africa?

Can we know which type of nails you are going to make? if common nails, that is easy. We can recommend our China nail making machine to you. Other a little hard for galvanized umbrella head Roofing nails, Galvanized concrete nails, U type nails, etc. IN China, people normally use Z94–3C, Z94–4C. Do you want to know more Questions about Nail making machine at Quora? We have a branch in East Africa for nails making business years. So we can help you to build your own nails making plant with Chinese Masters, including training and installing nails making machine.

What is Nail Making Machine price in China?

The nail making machine is used to make different types of nails, such as galvanized umbrella head Roofing nailsGalvanized concrete nails, Common iron wire nails, U type nails, etc. IN China, people normally use Z94–3C, Z94–4C. We have a branch in East Africa for nails making business years. So we can help you to build your own nails making plant with Chinese Masters, including training and installing nails making machine. Below are our main business countries. If you have interesting, contact us freely. We will continue to update some useful Questions about the China nail making machine at Quora for you.

Get your customized quote today