Wire nail making machine low noise
Why we need wire nail making machine low noise? When working in nail making workshop, the noise of punching is not comfortable. If too loud, we can’t bear it day by day. So this type is popular in Kenya and other African countries.
WIRE NAIL MAKING MACHINE LOW NOISE
Our wire nail making machine is low noise, less impact design. This high-Speed wire nail machines retained basic design and simple operation for Friendly use. Balanced critical parts result in low vibration & enhance life. Z94 New Generation High-Speed Low Noise Wire Nail Making Machine is our main product.
Z94 Type C New Generation, High Speed, Low Noise, Automatic Nail Making Machine. This Z94 series, new type C nail making machine plunger structure and oil pipe lubrication so as to ensure the features such as high speed, low noise and less impact. Especially, it can make the high quality of clout nails and other special nails.
If you’re in need of quality and stable z94 new generation high-speed low noise wire nail making machine, welcome to buy the machine from our factory. Made in China, quality no need worry. We are one of the leading manufacturers and suppliers in China, equipped with advanced equipment and technology. Welcome to contact us.
Features of low noise wire nail making machine
- Nail making speed: 360 pcs/min
- Suitable nail size range: diameter 2.0-3.8 ； length: 40-90mm
- High-quality nails: consistent nail head and shank length, defective rate 1/100000, which is very good for coil nail collating, and strip nail making.
- Easy operation and high efficiency: the machine is fully automatic and runs stable.
- Low maintenance cost.
- Save energy and labor cost.
- low noise.
- The above structure has One invention patent Tow utility model patents.
TESTING OF Z94 NAIL MAKING MACHINE BEFORE DELIVERY
WIRE DRAWING MACHINE FOR NAIL MACHINE
Bright Wire Drawing Producing Line pay off →peeling → polishing →wire drawing →tension stand → no-stop take up machine characteristic: no acid, no oxide skin, dry drawing, bright, high speed, save die, high efficiency.
WIRE POINTING MACHINE OPERATING VEDEO
BUTT WELDING MACHINE FOR WIRE DRAWING
GRINDERING MACHINE FOR NAIL CUTTER
SAPREPARTS FOR Z94 6C WIRE NAIL MAKING MACHINE
- Sharpening dies: this machine is to sharpen the head of steel wire before it is feed into the wire drawing machine, the principle of the drawing machine is that using different size of drawing dies, for example, to draw steel wire of 6.5 mm to 3.8 mm, we can use a drawing die of 3.8mm, sharpen the head of 6.5mm steel wire less than 3.8 mm first, then put the head into the die, then fix the head of the wire to the wire drawing machine, then start pulling. After the wire comes through the die, all the wire becomes the diameter of 3.8mm.
- Nail knife grinder: because after 1-2 days cutting, the nail knife installed on the wire nail making machines will become blunt, then you can use the nail knife grinder to grind the nail knife to make it sharp again.
- Gripping Dies: Machines are provided with round dies having 8 or 10 nail holding grooves
- Cutting Die: For cutting nails and making point after the head & shank are formed Diamond, Chisel, Round, Long or Blunt shaped Points can be made by grinding the tools appropriately
- Header Dies: Used for forming a nailhead Chequered or Plain Heads can be formed with these dies
- Nail Cutter and Die Grinder (supplied with a motor, Emery wheels and Pedestal Stand)
- Optional Accessories: Additional sets of Tooling (Set of Gripping Dies, Cutting Tools, and Header Dies)
- Standard Accessories: Electric Motor, Starter, Belts, One set of Tooling, Wire Stand and Hand Operated Lubricating Pump
- Further DETAILS OF Z94 6C NAIL MAKING MACHINE
AUXILIARY EQUIPMENT FOR SOUTH KOREA NAIL MAKING MACHINE
- Punch pin and nail Moulds.
- Connecting welding machine: in case the wire breaks during drawing, you can use the butt welding machine to weld the broken wire together, then continue the drawing. without this machine, if the wire breaks, you need to sharpen the wire head again and do all things from the start.
- Nail Polishing Drums (with a motor, starter, and belts)
- Wire Drawing Machine (WE OFFER A COMPLETE WIRE DRAWING LINE TO DRAW NAIL WIRE IN VARIOUS DIAMETERS FROM 6 mm or 5.5 mm WIRE RODS)
HOW TO GET RAW MATERIALS?
- Normally, you can buy from the local market or steel company.
- If they can sell low carbon iron wire rod Q195,6.5mm/5.5mm. You can buy and use a wire drawing machine to draw to the thickness you need.
- If better, you can get the thickness nails making wire you need.
- And if local no wire rod and nails making wire, better import from China for any type of them.
- What should import, depend on how is the quantity you want to produce daily output.
- If quantity not much, you can just import nails making wire.
- But if your quantity huge, better buy a wire drawing machine to draw for yourself using.
- Then you can start a Fully automatic nail making machine imported from China to make nails.
